HOLLEY EFI
HOLLEY MODULAR ULTRA LO-RAM EFI MANIFOLD LS1/2/6
Ultra Lo-Ram Manifold Kit – LS1/2/6-Black Finish
Part # 300-621BK
The Holley LS1/2/6 Ultra Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and the 105 mm throttle body part number 112-581 or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The 300-621 Ultra Lo-Ram front-feed plenum entry was configured to provide a very low profile modular intake manifold suitable for turbocharged or centrifugally supercharged engines. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.
Features:
- Designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads
- Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application.
- With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used
- Modular design allowing the use of front-feed plenum entry
- Intake design facilitates custom inlet duct and throttle body placement
- Low height to fit under a stock or mildly modified hood.
- Front entry plenum flange allows design & fabrication of special throttle body adapters or inlet ducts for custom installations
- Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification
- High volume fuel rails and mounting hardware included with ¾”-16 o-ring ports (8 AN)
| Brand | Holley EFI |
|---|---|
| Color | Black |
| Construction | Cast |
| Emission Code | 3 |
| Engine | GM LS1/LS2/LS6 |
| Finish | Black |
| Flange Style | EFI |
| Front Height | 6.86″ height with throttle body adapter |
| Fuel System Type | EFI |
| Injector Quantity | Single |
| Inlet Location | Front |
| Manifold Type | Ultra Lo-Ram |
| Product Type | Intake Manifold |
| Recommended Use | Forced Induction |
| RPM Power Band | 3500-8000 RPM |
| Warranty | Limited 90 Day |
| UPC | 090127079676 |
| Part Number | 300-621BK |
Reviews
There are no reviews yet.