MSD Archives - AB Performance Parts

For over a century Holley has driven the cutting edge of fuel-system design. That work continues today through Holley’s market-leading EFI products as well as through Holley’s family of best-in-industry brands. Top brands like MSD, Flowmaster, Hurst, Accel and many more make up the industry’s leading offering of enthusiast-driven products to deliver robust, complete performance solutions for builders, racers, and drivers. From propelling the LS-, Coyote-, and Gen 3 Hemi-swap trends, to continuously innovating late-model and vintage vehicle performance, Holley’s commitment to its customers and their cars is at the core of everything we do.

Showing 1–50 of 231 results

Sale!
Add to cart
ATOMIC ATOMIC AIRFORCE LS1/2/6 INTAKE MANIFOLD, BLACK Performance, polymer intake manifold for GM LS1, LS2 and LS6 engines. Part # 27023
Original price was: $1,256.00.Current price is: $1,129.95.
Sale!
Add to cart
ATOMIC ATOMIC EFI MASTER KIT This is the complete kit for anyone planning to convert from a carburetor to Atomic EFI. You get the Throttle Body, Power Module (with Wide Band O2 sensor), Handheld Controller, and the Standard Fuel Kit for up to 525hp (at the crank). Part # 2900
Original price was: $2,125.00.Current price is: $1,720.95.
Sale!
Add to cart
ATOMIC ATOMIC EFI THROTTLE BODY KIT MSD CARB Legal Atomic Throttle Body Fuel Injection Conversion for Carbureted Engines Part # 2910
Original price was: $1,747.00.Current price is: $1,349.95.
Sale!
Add to cart
ATOMIC ATOMIC TRANSMISSION CONTROLLER, STAND ALONE Easily modify the operating parameters of your GM or Ford 4-speed automatic transmission Part # 2760
Original price was: $992.00.Current price is: $746.95.
Sale!
Add to cart
ATOMIC ATOMIC, FUEL PRESSURE REGULATOR The recommended operating range is 15-90 psig (pounds per square inch gauge). Part # 2938
Original price was: $319.00.Current price is: $304.95.
Sale!
Add to cart
ATOMIC ATOMIC, FUEL PUMP RETURN KIT WITH REGULATOR Highly recommended to keep your fuel pump happy. Part # 2922
Original price was: $479.00.Current price is: $449.95.
Sale! Out of stock
Read more
ATOMIC ATOMIC, HIGH HORSEPOWER FUEL KIT, 625HP High horsepower fuel kit for use with Atomic TBI Part # 2921
Original price was: $967.00.Current price is: $217.49.
Sale!
Add to cart
ATOMIC ATOMIC, O2 SENSOR WIDEBAND Replacement Part Part # 2930
Original price was: $137.00.Current price is: $130.95.
Sale!
Add to cart
DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – BLACK – 3/4″ DEPTH RING GEAR Small Block Ford – 289-351 Windsor – Fits Bell Housing/Engine Block Plates with 4.084″ I.D. Registry Hole Part # 5090
Original price was: $456.00.Current price is: $394.95.
Sale!
Add to cart
DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – BLACK Cheverolet Small Block – Gen III/IV – LS1-LS7 – 4.4:1 Gear Reduction Part # 50963
Original price was: $468.00.Current price is: $405.95.
Sale!
Add to cart
DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – RED Chevrolet Small and Big Block – Staggered Mount Holes Part # 50951
Original price was: $536.00.Current price is: $449.95.
Sale!
Add to cart
DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – RED Chrysler 318-440 Cubic Inch Engines – Denso Style (Nose on Rear) Part # 5098
Original price was: $423.00.Current price is: $365.95.
Sale!
Add to cart
MSD ADJUSTABLE INTENSITY LED SHIFT LIGHT This compact shift light delivers a bright flash to alert you to shift. Part # 7542
Original price was: $137.00.Current price is: $130.95.
Sale!
Add to cart
MSD AMC V8 READY-TO-RUN DISTRIBUTOR Fits 290, 304, 343, 360, 390, 401 engines. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8523
Original price was: $673.00.Current price is: $582.95.
Sale!
Add to cart
MSD BLACK CHEVY V8 W/INTERNAL MODULE DISTRIBUTOR Black Ready-to-run distributors include a built-in ignition module-no MSD Ignition control required. Part # 83603
Original price was: $547.00.Current price is: $449.95.
Sale!
Add to cart
MSD BLACK SC WIRE SET, GEN V LT1/LT4 CORVETTE ’14-ON, TRUCK ’15-ON, CAMARO SS ’16-ON For use on GM LT1/LT4 GEN V Engines, ’14-On, Black Jacket Part # 33823
Original price was: $126.00.Current price is: $103.95.
Sale!
Add to cart
MSD CHANNEL 2, O2 SENSOR, HARNESS, AND BUNG KIT FOR PART NUMBER 7766 O2 sensor, wiring harness and bung kit used to add the secondary monitoring channel to the NTK Wide Band O2 Module part number 7766. Part # 2273
Original price was: $263.00.Current price is: $250.95.
Sale!
Add to cart
MSD CHEVROLET DIGITAL E-CURVE DISTRIBUTOR Set the timing curve with a twist of a rotary dial! Part # 8394
Original price was: $718.00.Current price is: $622.95.
Sale!
Add to cart
MSD CHEVY 348/409 READY TO RUN DISTRIBUTOR Ready-to-Run distributor for Chevy 348/409 engines Part # 8393
Original price was: $673.00.Current price is: $582.95.
Sale!
Add to cart
MSD CHEVY 409/509 READY TO RUN DISTRIBUTOR Aluminum Block Ready to Run. Part # 83931
Original price was: $645.00.Current price is: $536.95.
Sale!
Add to cart
MSD CHEVY PRO-BILLET RACING DISTRIBUTOR Large cap, locked out, 0.006″ over-sized bronze gear, billet parylene coated reluctor, parylene coated magnetic pickup, & slip collar. All the ingredients for an all out race dedicated distributor. Part # 85705
Original price was: $787.00.Current price is: $681.95.
Sale!
Add to cart
MSD CHEVY SB/BB CAM SYNC PLUG MSD’s cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal. Part # 85141
Original price was: $354.00.Current price is: $285.95.
Sale!
Add to cart
MSD CHEVY SB/BB TALL BLOCK CAM SYNC PLUG MSD’s Chevy extra tall cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal. Part # 85142
Original price was: $377.00.Current price is: $359.95.
Sale!
Add to cart
MSD CHEVY V8 MARINE READY-TO-RUN DISTRIBUTOR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required Part # 83606
Original price was: $729.00.Current price is: $589.95.
Sale!
Add to cart
MSD CHEVY V8 MARINE READY-TO-RUN DISTRIBUTOR- BLACK Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required Part # 83607
Original price was: $753.00.Current price is: $651.95.
Sale!
Add to cart
MSD CHEVY V8 W/INTERNAL MODULE DISTRIBUTOR AND BLACK CAP Ready-to-run distributors include a built-in ignition module so no MSD Ignition control required and supplied with Black Cap. Part # 83605
Original price was: $536.00.Current price is: $445.95.
Sale!
Add to cart
MSD CHEVY V8 W/INTERNAL MODULE DISTRIBUTOR Ready-to-run distributors include a built-in ignition module so no MSD Ignition control required. Part # 8360
Original price was: $536.00.Current price is: $422.95.
Sale!
Add to cart
MSD CHRYSLER 318-360, READY-TO-RUN DISTRIBUTOR Fits 273, 318, 340 and 360 small block Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8388
Original price was: $673.00.Current price is: $512.95.
Sale!
Add to cart
MSD CHRYSLER 383-400 READY-TO-RUN DISTRIBUTOR Fits 383, 400 Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8386
Original price was: $707.00.Current price is: $588.95.
Sale!
Add to cart
MSD CHRYSLER 392 READY-TO-RUN DISTRIBUTOR Fits early Hemi 392. Ready-to-run distributor includes a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8389
Original price was: $673.00.Current price is: $642.95.
Sale!
Add to cart
MSD CHRYSLER 426-440 READY-TO-RUN DISTRIBUTOR Fits 426, 440 Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8387
Original price was: $673.00.Current price is: $560.95.
Sale!
Add to cart
MSD CHRYSLER, 318, 340, 360, E-CURVE DISTRIBUTOR Set the timing curve with a twist of a rotary dial! Part # 8504
Original price was: $718.00.Current price is: $686.95.
Sale!
Add to cart
MSD CIRCLE TRACK DIGITAL SOFT-TOUCH HEI REV LIMITER For use with GM style HEI distributors on V8 engines only. Part # 8727CT
Original price was: $274.00.Current price is: $206.95.
Sale!
Add to cart
MSD CRATE ENGINE GM KIT (PN 8360, 8207, UNIV WIRE SET) This kit make it easy to add MSD performance to your new crate engine. Part # 84741
Original price was: $764.00.Current price is: $661.95.
Sale!
Add to cart
MSD CRATE ENGINE GM KIT (PN 8365, WIRE SET UNIVERSAL) This kit makes it easy to add MSD performance to your new crate engine. Part # 84742
Original price was: $875.00.Current price is: $835.95.
Sale!
Add to cart
MSD DIGITAL 6AL IGNITION CONTROL – RED Built-In Adjustable Rev-Limit Control Part # 6425
Original price was: $399.00.Current price is: $278.95.
Sale!
Add to cart
MSD DIRT SERIES SOFT TOUCH REV CONTROL This Soft Touch Rev Control is designed for inductive style ignition systems only. Part # 87286
Original price was: $239.00.Current price is: $228.95.
Sale!
Add to cart
MSD DIS DUAL COIL IGNITOR, 2 CHANNEL A DIS-series ignition control must be used. Part # 6302
Original price was: $134.00.Current price is: $111.95.
Sale!
Add to cart
MSD DIS-4 PLUS HIGH OUTPUT High output distributorless ignition. 2, 3 or 4-coil pack. Part # 62153
Original price was: $1,128.00.Current price is: $976.95.
Sale!
Add to cart
MSD DISTRIBUTOR, FORD 5.0L MUSTANG, 1994-95, NO MODULE Drop-in 94-95 5.0 EFI Pro-Billet distributor Part # 8455
Original price was: $502.00.Current price is: $434.95.
Sale!
Add to cart
MSD EARLY HEMI CHRYSLER 331 READY-TO-RUN DISTRIBUTOR Fits early Hemi engines 331, 354. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8391
Original price was: $673.00.Current price is: $642.95.
Sale! Out of stock
Read more
MSD EXHAUST PRESSURE MODULE Exhaust Pressure Module that compensates for A/F ratios on turbo applications when used with the MSD 7766 Dual Wide Band NTK O2 Module. Part # 7767
Original price was: $612.00.Current price is: $549.95.
Sale!
Add to cart
MSD FLATHEAD FORD READY-TO-RUN DISTRIBUTOR FOR ’49-’53 The 8-BA Flathead Distributor is supplied with a special die to help set up the hold down clamp. Part # 8573
Original price was: $787.00.Current price is: $681.95.
Sale!
Add to cart
MSD FORD 289, 302 E-CURVE PRO-BILLET DISTRIBUTOR Set the timing curve with a twist of a rotary dial! Part # 8503
Original price was: $718.00.Current price is: $686.95.
Sale!
Add to cart
MSD FORD 289/302 CAM SYNC PLUG MSD’s cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal. Part # 85221
Original price was: $354.00.Current price is: $306.95.
Sale!
Add to cart
MSD FORD 289/302 READY-TO-RUN DISTRIBUTOR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an iron gear and a rev limiter Part # 8352
Original price was: $650.00.Current price is: $512.95.
Sale!
Add to cart
MSD FORD 289/302 READY-TO-RUN DISTRIBUTOR, BLACK CAP Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an iron gear and a rev limiter Part # 83525
Original price was: $650.00.Current price is: $621.95.
Sale!
Add to cart
MSD FORD 289/302 READY-TO-RUN DISTRIBUTOR, STEEL GEAR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a steel gear and a rev limiter Part # 83521
Original price was: $718.00.Current price is: $597.95.
Sale!
Add to cart
MSD FORD 351C-460 READY-TO-RUN MARINE DISTRIBUTOR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required Part # 83506
Original price was: $684.00.Current price is: $652.95.
Sale!
Add to cart
MSD FORD 351C-460 READY-TO-RUN MARINE DISTRIBUTOR-BLACK Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required, Black Anodized Finish Part # 83507
Original price was: $684.00.Current price is: $652.95.

MSD

ATOMIC ATOMIC AIRFORCE LS1/2/6 INTAKE MANIFOLD, BLACK Performance, polymer intake manifold for GM LS1, LS2 and LS6 engines. Part # 27023

ATOMIC ATOMIC EFI MASTER KIT This is the complete kit for anyone planning to convert from a carburetor to Atomic EFI. You get the Throttle Body, Power Module (with Wide Band O2 sensor), Handheld Controller, and the Standard Fuel Kit for up to 525hp (at the crank). Part # 2900

ATOMIC ATOMIC EFI THROTTLE BODY KIT MSD CARB Legal Atomic Throttle Body Fuel Injection Conversion for Carbureted Engines Part # 2910

ATOMIC ATOMIC TRANSMISSION CONTROLLER, STAND ALONE Easily modify the operating parameters of your GM or Ford 4-speed automatic transmission Part # 2760

ATOMIC ATOMIC, FUEL PRESSURE REGULATOR The recommended operating range is 15-90 psig (pounds per square inch gauge). Part # 2938

ATOMIC ATOMIC, FUEL PUMP RETURN KIT WITH REGULATOR Highly recommended to keep your fuel pump happy. Part # 2922

ATOMIC ATOMIC, HIGH HORSEPOWER FUEL KIT, 625HP High horsepower fuel kit for use with Atomic TBI Part # 2921

ATOMIC ATOMIC, O2 SENSOR WIDEBAND Replacement Part Part # 2930

DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – BLACK – 3/4″ DEPTH RING GEAR Small Block Ford – 289-351 Windsor – Fits Bell Housing/Engine Block Plates with 4.084″ I.D. Registry Hole Part # 5090

DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – BLACK Cheverolet Small Block – Gen III/IV – LS1-LS7 – 4.4:1 Gear Reduction Part # 50963

DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – RED Chevrolet Small and Big Block – Staggered Mount Holes Part # 50951

DYNAFORCE MSD DYNAFORCE STARTER – HIGH TORQUE – RED Chrysler 318-440 Cubic Inch Engines – Denso Style (Nose on Rear) Part # 5098

MSD ADJUSTABLE INTENSITY LED SHIFT LIGHT This compact shift light delivers a bright flash to alert you to shift. Part # 7542

MSD AMC V8 READY-TO-RUN DISTRIBUTOR Fits 290, 304, 343, 360, 390, 401 engines. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8523

MSD BLACK CHEVY V8 W/INTERNAL MODULE DISTRIBUTOR Black Ready-to-run distributors include a built-in ignition module-no MSD Ignition control required. Part # 83603

MSD BLACK SC WIRE SET, GEN V LT1/LT4 CORVETTE ’14-ON, TRUCK ’15-ON, CAMARO SS ’16-ON For use on GM LT1/LT4 GEN V Engines, ’14-On, Black Jacket Part # 33823

MSD CHANNEL 2, O2 SENSOR, HARNESS, AND BUNG KIT FOR PART NUMBER 7766 O2 sensor, wiring harness and bung kit used to add the secondary monitoring channel to the NTK Wide Band O2 Module part number 7766. Part # 2273

MSD CHEVROLET DIGITAL E-CURVE DISTRIBUTOR Set the timing curve with a twist of a rotary dial! Part # 8394

MSD CHEVY 348/409 READY TO RUN DISTRIBUTOR Ready-to-Run distributor for Chevy 348/409 engines Part # 8393

MSD CHEVY 409/509 READY TO RUN DISTRIBUTOR Aluminum Block Ready to Run. Part # 83931

MSD CHEVY PRO-BILLET RACING DISTRIBUTOR Large cap, locked out, 0.006″ over-sized bronze gear, billet parylene coated reluctor, parylene coated magnetic pickup, & slip collar. All the ingredients for an all out race dedicated distributor. Part # 85705

MSD CHEVY SB/BB CAM SYNC PLUG MSD’s cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal. Part # 85141

MSD CHEVY SB/BB TALL BLOCK CAM SYNC PLUG MSD’s Chevy extra tall cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal. Part # 85142

MSD CHEVY V8 MARINE READY-TO-RUN DISTRIBUTOR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required Part # 83606

MSD CHEVY V8 MARINE READY-TO-RUN DISTRIBUTOR- BLACK Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required Part # 83607

MSD CHEVY V8 W/INTERNAL MODULE DISTRIBUTOR AND BLACK CAP Ready-to-run distributors include a built-in ignition module so no MSD Ignition control required and supplied with Black Cap. Part # 83605

MSD CHEVY V8 W/INTERNAL MODULE DISTRIBUTOR Ready-to-run distributors include a built-in ignition module so no MSD Ignition control required. Part # 8360

MSD CHRYSLER 318-360, READY-TO-RUN DISTRIBUTOR Fits 273, 318, 340 and 360 small block Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8388

MSD CHRYSLER 383-400 READY-TO-RUN DISTRIBUTOR Fits 383, 400 Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8386

MSD CHRYSLER 392 READY-TO-RUN DISTRIBUTOR Fits early Hemi 392. Ready-to-run distributor includes a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8389

MSD CHRYSLER 426-440 READY-TO-RUN DISTRIBUTOR Fits 426, 440 Chryslers. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8387

MSD CHRYSLER, 318, 340, 360, E-CURVE DISTRIBUTOR Set the timing curve with a twist of a rotary dial! Part # 8504

MSD CIRCLE TRACK DIGITAL SOFT-TOUCH HEI REV LIMITER For use with GM style HEI distributors on V8 engines only. Part # 8727CT

MSD CRATE ENGINE GM KIT (PN 8360, 8207, UNIV WIRE SET) This kit make it easy to add MSD performance to your new crate engine. Part # 84741

MSD CRATE ENGINE GM KIT (PN 8365, WIRE SET UNIVERSAL) This kit makes it easy to add MSD performance to your new crate engine. Part # 84742

MSD DIGITAL 6AL IGNITION CONTROL – RED Built-In Adjustable Rev-Limit Control Part # 6425

MSD DIRT SERIES SOFT TOUCH REV CONTROL This Soft Touch Rev Control is designed for inductive style ignition systems only. Part # 87286

MSD DIS DUAL COIL IGNITOR, 2 CHANNEL A DIS-series ignition control must be used. Part # 6302

MSD DIS-4 PLUS HIGH OUTPUT High output distributorless ignition. 2, 3 or 4-coil pack. Part # 62153

MSD DISTRIBUTOR, FORD 5.0L MUSTANG, 1994-95, NO MODULE Drop-in 94-95 5.0 EFI Pro-Billet distributor Part # 8455

MSD EARLY HEMI CHRYSLER 331 READY-TO-RUN DISTRIBUTOR Fits early Hemi engines 331, 354. Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a built-in rev limiter Part # 8391

MSD EXHAUST PRESSURE MODULE Exhaust Pressure Module that compensates for A/F ratios on turbo applications when used with the MSD 7766 Dual Wide Band NTK O2 Module. Part # 7767

MSD FLATHEAD FORD READY-TO-RUN DISTRIBUTOR FOR ’49-’53 The 8-BA Flathead Distributor is supplied with a special die to help set up the hold down clamp. Part # 8573

MSD FORD 289, 302 E-CURVE PRO-BILLET DISTRIBUTOR Set the timing curve with a twist of a rotary dial! Part # 8503

MSD FORD 289/302 CAM SYNC PLUG MSD’s cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal. Part # 85221

MSD FORD 289/302 READY-TO-RUN DISTRIBUTOR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an iron gear and a rev limiter Part # 8352

MSD FORD 289/302 READY-TO-RUN DISTRIBUTOR, BLACK CAP Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an iron gear and a rev limiter Part # 83525

MSD FORD 289/302 READY-TO-RUN DISTRIBUTOR, STEEL GEAR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a steel gear and a rev limiter Part # 83521

MSD FORD 351C-460 READY-TO-RUN MARINE DISTRIBUTOR Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required Part # 83506

MSD FORD 351C-460 READY-TO-RUN MARINE DISTRIBUTOR-BLACK Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required, Black Anodized Finish Part # 83507

Free Delivery

Easy Payment

Have Questions?

SOCIAL MEDIA